DP44020R Ball Joint — Wide vehicle coverage | DAPU AUTO PARTS

Model identification

DP44020R is a DAPU model number in the ball joint category, which the DAPU catalogue places under the suspension system. The part connects the control arm to the steering knuckle or hub carrier and at the outer end of the lower control arm.

Catalogue placement: category Ball Joint (下摆臂球头), system suspension.

This record describes the right-hand configuration; the opposite side carries a separate DP number.

OE number families

The 9 OE reference numbers on record for DP44020R fall into 5 number families. 3C0407 is the largest, with 2 numbers. Numbers within one family usually differ by revision code or year, which is why a single assembly can correspond to several references.

Quoting any one number from the list is sufficient for identification; the engineering team confirms equivalence against the vehicle record.

Using the OE reference numbers

The OE numbers listed for DP44020R can be used directly as search terms on the DAPU OE search page, which resolves a number to the model and its category.

Each of these numbers (L5QD407366A, L5QD407366, 5QM407366B and 6 more) refers to the same DAPU record; the catalogue keeps them as separate entries because vehicle manufacturers revise part numbers within a production run.

Aftermarket cross-reference

7 aftermarket cross-reference numbers are recorded against DP44020R, from CTR, FEBI BILSTEIN, LEMFÖRDER, MANDO, MOOG, TRW. These are stored as reference links in the catalogue, not as a claim of equivalence with any specific brand's product.

Fitment for a replacement part should still be confirmed against the vehicle record before supply.

Position within the category

Within the Ball Joint category, which holds 275 models in the DAPU catalogue, DP44020R is ranked 2 by recorded vehicle applications.

The ranking is a computed ordering of the fitment figure stored in the catalogue. It does not reflect sales volume, stock level or supply priority.

Vehicle applications

The catalogue records 1049 vehicle applications for DP44020R. The models reproduced on this page are a representative selection drawn from that record, not the complete list.

Vehicle brands are used to group the entries.

Fitment data is taken from the vehicle records held in the DAPU catalogue; model year and market-specific variants should be confirmed at the enquiry stage.

Brand coverage

Across 10 brands, the catalogue holds vehicle entries for DP44020R: VOLKSWAGEN (23), SEAT (9), SKODA (6), AUDI (5), AUDI (FAW) (4), CUPRA (4). Repeated brands differ by model designation or body style.

The brand grouping is for browsing only — fitment is verified per vehicle.

Body styles in the application record

Across the vehicle entries held for DP44020R, 7 distinct body styles appear. The most frequent are SUV (15), Hatchback (14), Estate (12), Saloon (8), accounting for about 82% of the listed entries.

Body style is recorded from the vehicle model designation in the catalogue; it is provided as a fitment reference and is not a restriction on which vehicles the part may fit.

OE reference numbers

9 OE reference numbers are recorded against DP44020R. The numbers below are the ones held in the DAPU catalogue; each of them is identified by its OE number during order processing.

In a quotation request, state the DP number together with any one of these OE numbers.

Identification data used for verification

Supply starts with a fitment check against the vehicle record: the arm bore diameter and the knuckle taper and the model's recorded overall dimensions.

A quotation request should state the DP number or any listed OE number, the vehicle model and year, and the quantity required, so that the match can be confirmed in one pass.