DP14052 Rack End | DAPU AUTO PARTS

Model identification

The rack end part DP14052 belongs to the steering system in the DAPU catalogue. connects the steering rack to the inner tie rod, and the component at the inner end of the tie rod, inside the rack housing.

Catalogue placement: category Rack End (转向机拉杆), system steering.

OE number families

The 4 OE reference numbers on record for DP14052 fall into 4 number families. 1K0423 is the largest, with 1 number. Numbers within one family usually differ by revision code or year, which is why a single assembly can correspond to several references.

Quoting any one number from the list is sufficient for identification; the engineering team confirms equivalence against the vehicle record.

Using the OE reference numbers

The OE numbers listed for DP14052 can be used directly as search terms on the DAPU OE search page, which resolves a number to the model and its category.

Each of these numbers (5WD423810A, 3C0423810A, 1KD423810 and 1 more) refers to the same DAPU record; the catalogue keeps them as separate entries because vehicle manufacturers revise part numbers within a production run.

Aftermarket cross-reference

6 aftermarket cross-reference numbers are recorded against DP14052, from CTR, FEBI BILSTEIN, LEMFÖRDER, MANDO, MOOG, TRW. These are stored as reference links in the catalogue, not as a claim of equivalence with any specific brand's product.

Fitment for a replacement part should still be confirmed against the vehicle record before supply.

Assembly position

The catalogue records the assembly position for DP14052 as "Front Axle". Position on the vehicle determines which side of the assembly the part is fitted and how the adjacent components are stacked.

Position data is used to distinguish left/right and front/rear variants that share an OE number.

Position within the category

Within the Rack End category, which holds 450 models in the DAPU catalogue, DP14052 is ranked 1 by recorded vehicle applications.

The ranking is a computed ordering of the fitment figure stored in the catalogue. It does not reflect sales volume, stock level or supply priority.

Vehicle applications

For DP14052 the catalogue holds 1236 vehicle applications. The list on this page is a representative extract from those records, not the entire catalogue.

Vehicle brands are used to group the entries.

Fitment data is taken from the vehicle records held in the DAPU catalogue; model year and market-specific variants should be confirmed at the enquiry stage.

Brand coverage

DP14052 is recorded against 8 brands — VOLKSWAGEN (30), SEAT (10), SKODA (7), AUDI (5), SKODA (SVW) (3), AUDI (FAW) (2). When a brand is listed more than once, the difference is in the model or body style.

Grouping by brand supports navigation; confirmation is always at the vehicle level.

Body styles in the application record

The vehicle entries for DP14052 show 8 body-style types; Hatchback (15), Estate (10), MPV (10), SUV (9) are the most common, covering about 73% of the listed entries.

Body style is recorded from the vehicle model designation in the catalogue; it is provided as a fitment reference and is not a restriction on which vehicles the part may fit.

OE reference numbers

4 OE reference numbers are recorded against DP14052. The numbers below are the ones held in the DAPU catalogue; each of them is identified by its OE number during order processing.

In a quotation request, state the DP number together with any one of these OE numbers.

Identification data used for verification

Supply starts with a fitment check against the vehicle record: the inner tie rod thread and the rack housing thread and the model's recorded overall dimensions.

A quotation request should state the DP number or any listed OE number, the vehicle model and year, and the quantity required, so that the match can be confirmed in one pass.